fiberglass sculpture decoration – first steps

i’ve got my dolphins, two of them.  i picked them up on the loading dock (the whole insides of the aquarium smells like fish!)

here’s the guy who helped me move the dolphins.  sorry about the blurry shot, but you know who you are.  you deserve a raise for your bright, helpful manner.

i left jim and the baby at home to go get them, but took my litle dog sudie, and she ended up going for a walk in the bowels of the aquarium, following that smell.  aside from a small mishap, which can be mended with epoxy, i got two nice specimens into the truck and across town to my side alley, outside the studio, where they are getting atmospherically washed and cleaned in preparation for being sanded and primed.  which, since it’s a three day rain looks like, will be on the weekend, when hopefully i don’t have to mind a three-year old.

sudie is now loose on the loading dock

so i’ve been reading up on the established way of painting these fiberglass sculptures.  there are lots of ways, the recommended way and the starving artist way.  i’ve seen many reprints of the cowpainter tips with different logos on the top; it’s something they provide.  i really like cowpainters.  their people have been so helpful, and so knowledgeable, and i’ve relied on them for information for several painted fiberglass sculptures.  i’m also finding a lot of help in the forums by model makers, since they’re having the same issues as i am, for instance covering cracks and priming fiberglass.

i’ve got to settle on my materials right away.  there’s a choice of what to use to sculpt things onto the sculpture, and a choice of the varnish, and more.  for instance, here’s a discussion of the difference between clays and molding compounds.  there’s the recommended magic sculp at $18/lb, and something a local dealer sells for a tiny bit cheaper but no shipping.  Aves Apoxie Sculpt $15/lb.  then they recommend the very expensive lascaux uv varnish $20 for 8 oz, that’s a lot, or golden’s  polymer acrylic varnish, which is more reasonable – just as long as it doesn’t say ‘top coat only’ because it still has to take the car varnish (polyurethane).  then there are other options.  and other supplies, like readymade bits and pieces of plastics, that i would be gluing down onto my sculpture, like a way to build the pumps and filters, rather then trying to find scale models of them from the manufacturer, if any such exist.

the final drawing, giving the general idea without overwhelming with complexity

i scanned in the final drawing, once i’d seen the sponsor‘s dynamite calendar showing all the work they put into their biggest project to date – the very georgia aquarium that’s the home of all this dolphin hubbub.  hurray, i get to do a dolphin for the guys who put in the pipes and plumbing and the heating and air for the entire aquarium, an enormous job.  i’m trying to arrange for a tour of their handywork soon, so i can get closeup shots of the pumps and filters i need to mock up.  i intend to go have sushi afterwards because of the fishy smell i anticipate will make me either very hungry or very nauseous.

note the variety of hoses, pipes, ducts and controls going in and around the dolphin.  pretty cool, huh?

i may need to go to party city and get a pair of these oversized sunglasses to serve as dolphin safety glasses

the dolphins are different than the drawings we had to go on when we designed them.  these i suppose were silhouettes drawn by the cowpainter artists.  the real water furls are much more pronounced than in the drawing, and the feet are much flatter than i expected.  they’ll need building out.  i can keep the water furls for the pipes dolphin, but for the other dolphin i’m going to have to build the base out extensively just to make it look like not water.

first they both need a good sanding.  and looking over the skin for flaws, holes, cracks, etc.  there are irregularities on their backs that i don’t like, and other things that need to be covered or smoothed out before i start painting.  look at that seam on the further dolphin, i want to sand that down, and the roughness in the back of the closer one.

and how’s this cool look up the skirts of one of the dolphins, eh?  it’s completely hollow, and all the contours are just bumps on the inside, and i can do anything i want to with these things and it’ll be okay if my workmanship is careful and well thought out, if i use adequate materials and use them with common sense and plenty of advice.  i’ve got until after xmas to get them both done, and since i’ve done this before i’m not going to waste as much time or materials as i did the first time.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s